Setup Menus in Admin Panel

+447946739882, +2348151453146   INFO@CHESSSUBSEAENGINEERING.ORG
     

As-Built Documentation Support Capabilities

As-Built documentation refers to the collection of documents and drawings that documents the existing state of the structure or facility, and contains mark-ups, annotations, and comments that have been made to the construction drawings (paper or electronic) or other contract documents during the construction phase.

Usually, the design engineering firm would provide a set of construction drawings to the construction contractor, which will be the basis of any construction on site. But due to some conditions not envisaged during design phase, some drawings may need to be modified on site during construction, subject to necessary approval of the resident engineer. All these changes would need to be marked-up on the construction drawings and later transferred to the original CAD drawings to generate the as-built drawings which now represents the final facility as constructed on site.

The importance of as-built documentation cannot be over-emphasised, as it is necessary for any future modifications or expansion to the structure or facility, to avoid clashes and damage to existing infrastructure, especially when they are below grade and are not visible.

Where as-built documentation of a facility does not exist, laser scanning technology can be deployed to create 3D model of the facility on a computer to reproduce the required drawings.

The Benefits of As-Built Documentation

  • Generate 2D drawings, plans, elevations, sections, piping drawings, etc.
  • Identification of deviations between the original documentation and the reality
  • Visualization of your facility as-is
  • Availability of data needed for reconstruction or modification work
  • Effective support for clash check (collision detection) while planning modifications or extensions to existing facilities

As-Built Documentation Services by Chess Subsea Engineering

Chess Subsea Engineering can help you produce the as-built documentation for your facility. We can help you in the following ways:

  • Incorporate red-line marked up drawing from site on existing electronic construction drawing to generate as-built documentation
  • Convert your as-built paper drawings to 2D CAD drawings (back drafting) and 3D Models.
  • Take your construction drawings to site and mark-up all modifications not previously captured, and incorporate same to produce as-built documentation
  • In conjunction with our laser scanning partners, completely create a 3D laser scan and model of your facility and generate relevant 2-D models e.g plans, layouts, elevations, sections, etc.
  • Update of existing documentation e.g P & IDs to new company standards

Get Social with US ON FACEBOOK

9 inch Subsea Production Riser Steep Wave Configuration ORCAflex Simulation

8 inch Subsea Production Riser Lazy S Wave Configuration ORCAflex Fatigue Simulation

8 inch Subsea Production Riser Lazy S Wave Configuration ORCAflex Fatigue Simulation

Transient Flow Over a Cylinder : Pressure Contour

Live Testimonials from some of our Candidates

Transient Flow Over a Cylinder : StreamLine Velocity

Engineering of Subsea Production Systems Level 1 and Level 2

Transient Flow Over a Cylinder : Eddy Viscosity

Subsea Hydraulic Flying Leads & Cable Cutters Engineering Design

Steel Catenary Riser & Hook Up Components Engineering Design

SURFs Carousel Engineering Design 3D Animations

Piggyback Block Render & Subsea Bend Restrictor Engineering Design

16 inch Subsea Pipe Pull In Installation Simulation with ORCAFLEX

16 inch Subsea Lazy S Riser with Mid Water Arch Orcaflex Simulation

8 inch Subsea Production Pipeline S Lay Installation Simulation via Articulated Stinger

Subsea Riser Bouyancy Modules 3D Front End Engineering Conceptual Design & Simulations

10 inch Production Pipeline S Lay Installation Simulation via Articulated Stinger ORCAflex Explicit

16 inch Subsea Pipeline Davit Lift Orcaflex Simulation

8 inch Subsea Production Steel Catenary Riser ORCAflex Simulation

2 x 10 inch Subsea Production Riser Pliant Wave Configuration ORCAflex Simulation

ENGINEERING COMPETENCE AT ITS BEST!

From talent development and organizational performance to engineering and operational needs, we are driven by one goal: improve your performance through innovative solutions.

Continuing Professional Development

Our Renewable Energy, Offshore & Subsea Engineering CPD OJT courses are structured for engineers seeking to attain or maintain Chartered Status. Get to know more.

Computational Fluid Dynamics (CFD)

Using CFD, you are able to analyze complex aerodynamics and hydrodynamics problems involving fluid-fluid, fluid-solid or fluid-gas interaction.

top
© 2023. All Rights Reserved.
X